The UB-E04 Ethernet Interface Board for Epson TM printers works in nearly every Epson TM Series printer with a swappable interface. The UB-E04 features:
Ethernet- 10 Base-T, 100 Base-TX Ethernet; Full duplex/half duplex (supports auto negotiation); Supports Auto-MDIX
Wireless LAN- Supports Wireless LAN with connection of optional Wireless LAN unit to the USB Type-A connector; IEEE802.11b/g/n (2.4 GHz) compliant; Supports infrastructure mode and 802.11 ad hoc mode; Supports WEP (64/128 bit), WPA2-PSK and WPA2-Enterprise.
Network Function- Supports TCP/IP protocol; Supports DHCP and APIPA; Supports ENPC and SNMP (used to acquire printer status); Supports IPv4
Please note that Dip switches need to be adjusted on the printer for the card to be active.
If you have any questions, Hillside Electronics is available for free technical phone support. With almost 40 years of experience in POS Printer Sales and Certified Repairs, we are proud to provide thousands of businesses with an expert knowledge base beyond compare.
I was looking to reuse my existing POS printers on a new POS system that I purchased and I was told by the software company that I could not, because my printers we RS232 serial interface and no one supported that anymore. I found this site www/hec.com and called and was told that I could upgrade my printers. I ordered several Ethernet UB-E04 interfaces. They arrived in just a few days and when I went to install them, there was no connection to my network. I decided to call back Mike at Hillside Electronics for some technical assistance and to my surprise, within 5 minutes they had me up and running. The old printer only needed the dip switches changed to activate the IP(Ethernet) board. My new POS system works great and the printers are not only faster now, they are also networked and connected to my router. Being connected this way allowed me to print to this older printer through a wireless connection. These guys saved me thousands of dollars. Give them a shot you'll be happy you did.